MENU
 
 
 
 

  • Inductance detection scheme

    1 vote
    Inductance detection scheme
    Servings: 1
    by Formed cru
    25 recipes
    >
    Inductance Detection Scheme Shenzhen SPOTECK Technology Co., Ltd. SPOTECK has been focusing on machine vision inspection for 13 years For product appearance size, defects, defects, scratches, stains, burrs and other detection There are countless test cases. Welcome to inquire and get the test plan free of charge. 1. Contents and requirements of testing Measure workpiece area: Inspection of bottom appearance, top appearance and size of inductance sample Content of detection: 1: Detect the damage and notch on the bottom. 2. Side detection of height and width. 2. Top surface inspection for breakage and notch. Note: The above detection items need to be clearly visible under the image to detect. Detection efficiency: 300-450 pieces per minute (according to sample feeding speed). Division of work: Subdivide the detection steps according to the detection content. II. Equipment Composition and Major Institutions Overall Composition: Dimension: 900*800*1850 mm Model: SP_302C

    Ingredients

    • 1:SPOTECK Visual Detection Software
    • 2: industrial computer
    • 3: display 19 inches
    • 4: Industrial cameras: 3 sets, bottom detection, side detection, top detection
    • 5: Industrial lens: 2 FA industrial lens, 1 telecentric lens
    • 6: professional glass tray
    • 7: solenoid valve
    • 8: reducer
    • 9: vibration cabinet
    • 10: Feeding equipment (Vibrating disc, Direct Vibration, Controller).
    • • visual inspection machine manufacturer
    • • automated optical inspection machine manufacturers
    • • Sipotek Visual Inspection Machine
    • II.1: 3-D Stereogram of Equipment Appearance

    Directions

    1. 3:1 Bottom Testing Hole Mode
    2. The original picture of bottom detection effect:
    3. 3:1 Bottom Testing Hole Mode
    4. Bottom Test Fine Product Analysis Chart: OK
    5. 3:1 Bottom Testing Hole Mode
    6. Underprint negative result map: NG
    7. 3:1 Bottom Testing Hole Mode
    8. free shipping coupon code: freeshipping on any order from sipotek.net
    9. For more information visit here….
    10. Bottom detection result chart: NG
    11. 3:1 Bottom Testing Hole Mode
    12. Bottom detection result chart: NG
    13. 3:2 Side Detection Method
    14. The original image of side detection effect:
    15. 3:2 Side Detection Method
    16. Analysis Chart of Fine Products for Side Detection: OK
    17. 3:3 Top Detection Method
    18. Top detection effect original picture:
    19. 3:3 Top Detection Method
    20. Top test product analysis chart: OK
    21. 3:3 Top Detection Hole Mode
    22. Top Detection Print Anti-Bad Result Diagram:NG
    23. IV. System Installation Requirements:
    24. Inspection space for equipment placement: Separately installing SP visual inspection system at the pipeline side, it is necessary to ensure that there is enough space to install the equipment.
    25. Ambient temperature: 0-50 degrees Celsius;
    26. Air humidity: below 90% RH;
    27. Electronic jamming: Provide equipment with less electronic jamming.
    28. Power supply: 220V, 50Hz AC, less than 1KVA power consumption

    Useful Links

    Leave a review or comment